Consul service mesh provides service-to-service connection authorization and encryption using mutual Transport Layer Security (TLS). Applications can use sidecar proxies in a service mesh configuration to automatically establish TLS connections for inbound and outbound connections without being aware of the service mesh at all.

Nomad with Consul Service Mesh Integration

Nomad integrates with Consul to provide secure service-to-service communication between Nomad jobs and task groups. To support Consul service mesh, Nomad adds a new networking mode for jobs that enables tasks in the same task group to share their networking stack. With a few changes to the job specification, job authors can opt into service mesh integration. When service mesh is enabled, Nomad will launch a proxy alongside the application in the job file. The proxy (Envoy) provides secure communication with other applications in the cluster.

Nomad job specification authors can use Nomad's Consul service mesh integration to implement service segmentation in a microservice architecture running in public clouds without having to directly manage TLS certificates. This is transparent to job specification authors as security features in service mesh continue to work even as the application scales up or down or gets rescheduled by Nomad.

For using the Consul service mesh integration with Consul ACLs enabled, see the Secure Nomad Jobs with Consul Service Mesh guide.

Nomad Consul Service Mesh Example

The following section walks through an example to enable secure communication between a web dashboard and a backend counting service. The web dashboard and the counting service are managed by Nomad. Nomad additionally configures Envoy proxies to run along side these applications. The dashboard is configured to connect to the counting service via localhost on port 9001. The proxy is managed by Nomad, and handles mTLS communication to the counting service.

Prerequisites

Consul

The Consul service mesh integration with Nomad requires Consul 1.6 or later. The Consul agent can be run in dev mode with the following command:

$ consul agent -dev

To use service mesh on a non-dev Consul agent, you will minimally need to enable the GRPC port and set connect to enabled by adding some additional information to your Consul client configurations, depending on format. Consul agents running TLS and a version greater than 1.14.0 should set the grpc_tls configuration parameter instead of grpc. Please see the Consul port documentation for further reference material.

For HCL configurations:

# ...ports {  grpc = 8502}connect {  enabled = true}

For JSON configurations:

{  // ...  "ports": {    "grpc": 8502  },  "connect": {     "enabled": true  }}

Consul TLS

consul {  grpc_ca_file = "/etc/tls/consul-agent-ca.pem"  grpc_address = "127.0.0.1:8503"  ca_file      = "/etc/tls/consul-agent-ca.pem"  cert_file    = "/etc/tls/dc1-client-consul-0.pem"  key_file     = "/etc/tls/dc1-client-consul-0-key.pem"  ssl          = true  address      = "127.0.0.1:8501"}

Consul ACLs

To facilitate cross-Consul datacenter requests of Connect services registered by Nomad, Consul agents will need to be configured with default anonymous ACL tokens with ACL policies of sufficient permissions to read service and node metadata pertaining to those requests. This mechanism is described in Consul #7414. A typical Consul agent anonymous token may contain an ACL policy such as:

service_prefix "" { policy = "read" }node_prefix    "" { policy = "read" }

Transparent Proxy

Using Nomad's support for transparent proxy configures the task group's network namespace so that traffic flows through the Envoy proxy. When the transparent_proxy block is enabled:

• Nomad will invoke the consul-cni CNI plugin to configure iptables rules in the network namespace to force outbound traffic from an allocation to flow through the proxy.
• If the local Consul agent is serving DNS, Nomad will set the IP address of the Consul agent as the nameserver in the task's /etc/resolv.conf.
• Consul will provide a virtual IP for any upstream service the workload has access to, based on the service intentions.

Using transparent proxy has several important requirements:

• You must have the consul-cni CNI plugin installed on the client host along with the usual required CNI plugins.
• To use Consul DNS and virtual IPs, you will need to configure Consul's DNS listener to be exposed to the workload network namespace. You can do this without exposing the Consul agent on a public IP by setting the Consul bind_addr to bind on a private IP address (the default is to use the client_addr).
• The Consul agent must be configured with recursors if you want allocations to make DNS queries for applications outside the service mesh.
• Your workload's task cannot use the same Unix user ID (UID) as the Envoy sidecar proxy.
• You cannot set a network.dns block on the allocation (unless you set no_dns, see below).

For example, a HCL configuration with a go-sockaddr/template binding to the subnet 10.37.105.0/20, with recursive DNS set to OpenDNS nameservers:

bind_addr   = "{{ GetPrivateInterfaces | include \"network\" \"10.37.105.0/20\" | limit 1 | attr \"address\" }}"recursors = ["208.67.222.222", "208.67.220.220"]

Nomad

Nomad must schedule onto a routable interface in order for the proxies to connect to each other. The following steps show how to start a Nomad dev agent configured for Consul service mesh.

$ sudo nomad agent -dev-connect

CNI Plugins

Nomad uses CNI reference plugins to configure the network namespace used to secure the Consul service mesh sidecar proxy. All Nomad client nodes using network namespaces must have these CNI plugins installed.

To use transparent_proxy mode, Nomad client nodes will also need the consul-cni plugin installed. See the Linux post-installation steps for more detail on how to install CNI plugins.

Run the Service Mesh-enabled Services

Once Nomad and Consul are running, with Consul DNS enabled for transparent proxy mode as described above, submit the following service mesh-enabled services to Nomad by copying the HCL into a file named servicemesh.nomad.hcl and running: nomad job run servicemesh.nomad.hcl

job "countdash" {  datacenters = ["dc1"]  group "api" {    network {      mode = "bridge"    }    service {      name = "count-api"      port = "9001"      connect {        sidecar_service {          proxy {            transparent_proxy {}          }        }      }    }    task "web" {      driver = "docker"      config {        image = "hashicorpdev/counter-api:v3"      }    }  }  group "dashboard" {    network {      mode = "bridge"      port "http" {        static = 9002        to     = 9002      }    }    service {      name = "count-dashboard"      port = "http"      connect {        sidecar_service {          proxy {            transparent_proxy {}          }        }      }    }    task "dashboard" {      driver = "docker"      env {        COUNTING_SERVICE_URL = "http://count-api.virtual.consul"      }      config {        image = "hashicorpdev/counter-dashboard:v3"      }    }  }}

The job contains two task groups: an API service and a web frontend.

API Service

The API service is defined as a task group with a bridge network:

group "api" {  network {    mode = "bridge"  }  # ...}

Since the API service is only accessible via Consul service mesh, it does not define any ports in its network. The connect block enables the service mesh and the transparent_proxy block ensures that the service will be reachable via a virtual IP address when used with Consul DNS.

group "api" {  # ...  service {    name = "count-api"    port = "9001"    connect {      sidecar_service {        proxy {          transparent_proxy {}        }      }    }  }  # ...}

The port in the service block is the port the API service listens on. The Envoy proxy will automatically route traffic to that port inside the network namespace. Note that currently this cannot be a named port; it must be a hard-coded port value. See GH-9907.

Web Frontend

The web frontend is defined as a task group with a bridge network and a static forwarded port:

group "dashboard" {  network {    mode = "bridge"    port "http" {      static = 9002      to     = 9002    }  }  # ...}

The static = 9002 parameter requests the Nomad scheduler reserve port 9002 on a host network interface. The to = 9002 parameter forwards that host port to port 9002 inside the network namespace.

This allows you to connect to the web frontend in a browser by visiting http://<host_ip>:9002 as show below:

The web frontend connects to the API service via Consul service mesh.

service {  name = "count-dashboard"  port = "http"  connect {    sidecar_service {      proxy {        transparent_proxy {}      }    }  }}

The connect block with transparent_proxy configures the web frontend's network namespace to route all access to the count-api service through the Envoy proxy.

The web frontend is configured to communicate with the API service with an environment variable $COUNTING_SERVICE_URL:

env {  COUNTING_SERVICE_URL = "http://count-api.virtual.consul"}

The transparent_proxy block ensures that DNS queries are made to Consul so that the count-api.virtual.consul name resolves to a virtual IP address. Note that you don't need to specify a port number because the virtual IP will only be directed to the correct service port.

Manually Configured Upstreams

You can also use Connect without Consul DNS and transparent_proxy mode. This approach is not recommended because it requires duplicating service intention information in an upstreams block in the Nomad job specification. But Consul DNS is not protected by ACLs, so you might want to do this if you don't want to expose Consul DNS to untrusted workloads.

In that case, you can add upstream blocks to the job spec. You don't need the transparent_proxy block for the count-api service:

group "api" {  # ...  service {    name = "count-api"    port = "9001"    connect {      sidecar_service {}    }  }  # ...}

But you'll need to add an upstreams block to the count-dashboard service:

service {  name = "count-dashboard"  port = "http"  connect {    sidecar_service {      proxy {        upstreams {          destination_name = "count-api"          local_bind_port  = 8080        }      }    }  }}

The upstreams block defines the remote service to access (count-api) and what port to expose that service on inside the network namespace (8080).

The web frontend will also need to use an environment variable to communicate with the API service:

env {  COUNTING_SERVICE_URL = "http://${NOMAD_UPSTREAM_ADDR_count_api}"}

This environment variable value gets interpolated with the upstream's address. Note that dashes (-) are converted to underscores (_) in environment variables so count-api becomes count_api.

Limitations

• The minimum Consul version to use Connect with Nomad is Consul v1.8.0.
• The consul binary must be present in Nomad's $PATH to run the Envoy proxy sidecar on client nodes.
• Consul service mesh using network namespaces is only supported on Linux.
• Prior to Consul 1.9, the Envoy sidecar proxy will drop and stop accepting connections while the Nomad agent is restarting.

Troubleshooting

If the sidecar service is not running correctly, you can investigate potential envoy failures in the following ways:

• Task logs in the associated connect-* task
• Task secrets (may contain sensitive information):
  • envoy CLI command: secrets/.envoy_bootstrap.cmd
  • environment variables: secrets/.envoy_bootstrap.env
• An extra Allocation log file: alloc/logs/envoy_bootstrap.stderr.0

For example, with an allocation ID starting with b36a:

nomad alloc status -short b36a  # to get the connect-* task namenomad alloc logs -task connect-proxy-count-api -stderr b36anomad alloc exec -task connect-proxy-count-api b36a cat secrets/.envoy_bootstrap.cmdnomad alloc exec -task connect-proxy-count-api b36a cat secrets/.envoy_bootstrap.envnomad alloc fs b36a alloc/logs/envoy_bootstrap.stderr.0

Note: If the alloc is unable to start successfully, debugging files may only be accessible from the host filesystem. However, the sidecar task secrets directory may not be available in systems where it is mounted in a temporary filesystem.

Bootstrapping the Envoy proxy requires that the Consul ACL token and service registration have successfully replicated to whichever Consul server the local Consul agent is connected to. Nomad clients poll for this value with exponential backoff and a timeout. You can adjust the timeouts on a given node by setting node metadata values via the command line or in the client.meta agent configuration block. The default values are shown below:

nomad node meta apply -node-id $nodeID \    consul.token_preflight_check.timeout=10s \    consul.token_preflight_check.base=500ms \    consul.service_preflight_check.timeout=60s \    consul.service_preflight_check.base=1s